ג׳ירו בלוג: הטכנולוגיה שמאחורי מחבט הפיקלבול

The Technology Behind the Pickleball Paddle: Carbon Fiber, Thermoforming and CFS

Every layer of a pickleball paddle, from the face to the core and the edge, affects power, control, spin and how long the paddle will serve you. Here we take the paddle apart and explain the terms you see in model names: Carbon, T700, CFS and Thermoformed.

The three layers of every paddle

  • Face: the layer that meets the ball. Its material and texture set the feel, the pop and the spin.
  • Core: the inner layer. In most paddles today it is a polymer honeycomb, and its thickness affects stability and absorption.
  • Frame and edge guard: they hold the structure together, protect it from impacts and affect weight distribution.

The face: fiberglass or carbon fiber

Fiberglass

A relatively flexible material with a lively, springy feel. The flex creates power even on a soft swing, so these paddles are forgiving and very comfortable for players starting out. You will find them in our Improver, Xtrainer and Cavalier series.

Carbon fiber

Stiff and light for its strength. The touch is more precise, there is less vibration and more control, which is why most competitive paddles today are carbon. A carbon paddle launches the ball less and leaves the decision of where and how deep to you.

What is T700?

T700 is a grade of high strength carbon fiber made by Toray of Japan. It is one of the most common carbon types in pickleball paddles, thanks to its balance of durability, feel and spin.

Raw carbon and smooth carbon

Raw carbon is an uncoated carbon surface with a rough texture that touches the ball directly. The texture grabs the ball for a split second, and that is where the spin comes from. Smooth carbon is protected by a finish layer and gives a clean, consistent touch. Raw carbon texture also wears over time, so regular cleaning with a dedicated cleaning sponge keeps it performing.

CFS: Carbon Friction Surface

CFS stands for Carbon Friction Surface, a carbon face with a friction texture that increases grip on the ball and spin. You will see this label on our Qpro Light CFS 20mm, Predator CFS 16mm, Blaster CFS and Jerusalem v1 CFS.

Good to know: USA Pickleball limits how rough a paddle face can be in sanctioned play. Texture is not a shortcut. An approved paddle stays within the standard, and spin still comes mostly from your technique.

The core: polymer honeycomb

Most modern paddles are built around a polymer core with a honeycomb structure. The hexagonal cells create a light, stable structure that absorbs energy and vibration. In Jiru paddles the core is a polymer honeycomb with an 8/8 mm cell size.

The key number in the core is thickness: 14, 16 or 20 mm. A thin core gives a fast response and pop, a thick core adds stability and absorption. In modern paddles the construction method also changes the picture, and we cover that in Power vs. Control.

Thermoforming: a paddle in one piece

Until a few years ago most paddles were made the traditional way (cold press): the face is glued to the core like a sandwich, and the edge guard is glued on separately. With thermoforming the paddle is formed with heat and pressure, and the carbon wraps around the edges into one continuous, sealed structure called a unibody. Most of these paddles also have foam injected along the edges.

What does it give you?

  • Durability: there is no weak seam between the face and the frame, and the structure stays stable over time.
  • A wide sweet spot: the reinforced edges reduce the difference between a center hit and a hit near the edge.
  • Power: a stiff structure transfers more energy to the ball.

What to keep in mind? Thermoformed paddles cost more to make, and some players feel slightly less soft touch at the net. Ours is the AIR Full-Carbon 20mm Thermoformed, a 20 mm paddle that combines control, responsiveness and durability.

So which technology fits you?

  • Fiberglass: pop, forgiveness and easy power. A fit for beginners and recreational players.
  • Smooth carbon: clean touch, precision and control. A fit for players who want consistency.
  • Raw carbon and CFS: grip on the ball and spin. A fit for advanced and competitive players.
  • Thermoforming: durability, a wide sweet spot and power. A fit for advanced players who want performance.

FAQ

Is a carbon paddle right for beginners too?

Yes, but it is not a must. Many beginners enjoy fiberglass more thanks to its forgiveness. When your technique develops and you want more control and spin, that is the time to move to carbon.

Does CFS texture wear out?

Every texture wears gradually. Regular cleaning and a protective bag between games extend the life of the paddle.

Is thermoformed always better?

Not necessarily. It is more durable and powerful, but control players who love a soft touch at the net may prefer a traditional paddle. Fit to your style of play matters more than the technology.

Keep reading

Want to see the technology in action? All the paddles are waiting for you in the collection. See you on the court!